Cooling storage could be the best investment you can do to the productivity of workers ... and the end result to be. Spent, in fact, in a NASA study on the effects of heat on workers, found that workers in a room of 75 degrees 29% more productive than those used to 90 degrees, and work closely to improve by 300 percent ! Water breaks are less necessary, which is higher morale and fewer mistakes are made. Not to mention the savings in lost time indicated where workers are covered by heatInjury.
The options range from misting fans evaporative coolers, a tool that you never thought that you can take indoors depending on ... High-pressure ventilation systems are equipped! And there are more tools out there. But a proper cooling program storage system, a simple investment that pays big dividends.
A variety of products out there that are very effectively cool large areas or cool kids ... Depending on your specific needs.
Misting fans the ultimate machine for cold storagespacious rooms. These fans can 11000cfm fogging up the wind. Rings of mist high pressure are recorded on the front of the fan. The breeze with the power of evaporative cooling mist into the room through a combination capable of cooling up to 35 degrees when used properly. The result is a wonderful tool for cooling the bearings, the cold up to 3000 square feet! The best strategy is to put them in opposite corners, or all four corners of the field, and then mount up. Normally, misting pump, fogging run every 4Fans. Evaporative coolers can be great for cooling or refrigeration for storage of smaller spaces. Medium-sized enterprises evaporative coolers are similar to cold 4x4 swamp, you have probably seen. Evaporative can be a swing spout, the spread actually come in cold air over a larger area. These are better than local cooling assembly areas or loading docks, where 500 square feet or less need for cooling instead. Another good choice is a 4-sided model, blows cold airfrom all four sides. Put this in the middle of a work area for cooling smaller place by anyone around the car. Misting systems for cooling the warehouse will be used where it is possible to open doors or vents hot pour in the loading ramps, in particular, can make a lot of hot air in the field. This is a high pressure water mist system can be of great help. The strategy is to provide a "smokescreen" that hangs on every port. The hot air is cooled in the evaporative cooling, whenpasses through. And high-pressure misting, water actually evaporates in the air so that no wet or slippery. Each docking port actually works like a large evaporative cooler! Misting pump with the same lines on each port docks, and other vents each tributary running into the building. Misting fans can run the fan itself, and for extra cooling. Off the heat, cool. The results can be surprising. And the workers loading andUnloading of trucks with more comfort and safety in the vicinity of the doors.
These are only some of the common stock cooling needs. With a little 'research and planning, it should be possible to significant improvements in security effectiveness and productivity of employees ... inventory and make a whole. It may be the best investment you make in your business.
No comments:
Post a Comment